Okanagan-born nanoscientist thinking small in a big way

For years, Penticton-born nanoscientist Nigel Clarke has explored the practical use of structures invisible to the naked eye. These photographs, taken by Clarke, are from his time spent working with the California Institute of Technology. (Photo courtesy of Nigel Clarke)
Born and raised in Penticton, the now 27-year-old Senior Research Engineer is working to develop game-changing technology which could affect many things. (Photos courtesy of Nigel Clarke)
To start the creation of these microscopic structures, Clarke covers a surface with a light-sensitive material, Photoresist, which reacts when it comes into contact with light. By moving lasers around in 3D space, he can draw microscopic structures one line at a time out of “thin air”. (Photos courtesy of Nigel Clarke)
By designing these microscopic structures, scientists can observe how certain materials behave. This allows them to create structures with unique properties, not normally seen in larger materials. (Photos courtesy of Nigel Clarke)
In future, this could result in the creation of extremely strong structures which are also very lightweight. One use already implemented is the creation of artificial bone. (Photos courtesy of Nigel Clarke)
Penticton-born nanoscientist, Nigel Clarke. (Submitted)

Building a structure out of toothpicks and glue takes creativity, patience and careful planning. But imagine trying to build a similar structure which height is the thickness of a piece of paper. The beams and supports, a 50th the thickness. Sounds impossible, right?

Although he can’t see them with his naked eye, nanoscientist and Penticton native Nigel Clarke has been building these microscopic structure, as well as other creations, for years. For nanoscientists, thinking small in a big way is key.

Based out of Mountain View, California, Clarke works to explore new product ideas with Samsung’s Thing Tank Team. His day-to-day is spent brainstorming and building new creations; from new TV displays to virtual reality, and even robot arms that cook in your kitchen.

Born and raised in Penticton, the now 27-year-old Senior Research Engineer is working to develop game-changing technology which could affect many things.

[Story continues below]

[Nanoscientist and research engineer, Nigel Clarke. Supplied]

“I always liked inventing things, so I wanted to be on the bleeding edge of something,” said Clarke. “So when I first about nanotechnology, I was immediately attracted to it. Because it seemed like such a new field, there were so many opportunities to create new things.”

After graduating from Penticton Secondary School in 2010 and the University of Waterloo for Nanotechnology Engineering in 2015, Clarke went on to receive his masters in Mechanical Engineering and Design Methodology from Stanford University in 2018. His masters was based on the most efficient way of testing and learning from products in order to figure out what should be produced.

Throughout his education he explored nanofabrication and the creation of objects so small, their structure cannot be fully appreciated with light-based microscopes.

By designing these microscopic structures, scientists can observe how certain materials behave. This allows them to create structures with unique properties, not normally seen in larger materials.

Clarke has previously worked with a group, led by California Institute of Technology professor Julia Greer, to develop this technology and turn it into something practical.

In addition to these microscopic structures, Clarke has also researched how light behaves differently at the nanoscale, which helped in the development health sensors. He also worked on the development of thin flexible electronics, used in contact lenses.

Imagine shining light through a microscope; at a certain point the ray of light is so concentrated that it has the ability to burn. At the very centre of this hourglass shape, the light is the brightest.

To start the creation of these microscopic structures, Clarke covers a surface with a light-sensitive material, Photoresist, which reacts when it comes into contact with light. When exposed to light, the Photoresist then changes from appearing like a liquid, to appearing like a solid. In other words areas that are exposed to the bright light crosslink and become a hard material, eventually forming a structure.

By moving lasers around in 3D space, they can draw microscopic structures one line at a time out of “thin air”.

“The main thing this group was trying to do was look at these unique properties that you only get at the nano scale, pretty much a strength improvement in this normally brittle material and say; are there ways that we can bring that type of property to larger materials that we use every day,” said Clarke.

In future, this could result in the creation of extremely strong structures which are also very lightweight. One use already implemented is the creation of artificial bone.

To see Clarke’s photos up close, visit the St. Germain café downtown Penticton where they are currently on display. He credited his mother for allowing him to view his photographs as art, and showcase them to the world.

READ MORE: Morning Start: Did you know there is a liquid you can breathe like air?

@PentictonNews
editor@pentictonwesternnews.com

Like us on Facebook and follow us on Twitter.

Science

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Kelowna author raising money for scholarships

Roxi Harms said all book proceeds go to the scholarship fund

Coming together to Do Some Good

The Kelowna Capital News and Lake Country Calendar join a local tech company to support community causes

West Kelowna lowers tax increase from 4.8% to 2.8% amid COVID-19 pandemic

The municipality also waived interest on utility bills through 2020

West Kelowna RCMP looking for three stolen E-bikes

The bikes were stolen over a week dating back to April 1

YMCA Okanagan cancels Healthy Kids Day due to COVID-19 concerns

The YMCA also plans to reschedule its YMCA Cycle for Strong Kids for this fall

WATCH: Salmon Arm artist hosts virtual art show amid COVID-19

Roxi Hermsen’s show “Into the Cosmos” is a tribute to her father Bill Sim

UPDATE: Coronavirus concerns prompt event cancellations across the Okanagan

This is a running list of events cancelled across the Okanagan

Kettle Valley Steam Railway cancels Easter trains

Decision comes as a result of COVID-19 pandemic

Straight from DeHart

Creating some Easter fun with PepsiCo’s help

Video: Wildfire near Chase being held by fire crews

BC Wildfire Service reports blaze believed to have been human caused

Coronavirus cancels rural Okanagan communities biggest events

The 65th annual event celebrating the village’s incorporation was set for June 12-14; will go in 2021

B.C. secures motel, hotel rooms for COVID-19 shelter space

Community centres, rooms reserved for pandemic self-isolation

Sanders drops 2020 bid, leaving Biden as likely nominee

Sanders plans to talk to his supporters later Wednesday

Most Read